diff options
Diffstat (limited to 'peripheral/libmraa/docs/grossetete.md')
| -rw-r--r-- | peripheral/libmraa/docs/grossetete.md | 112 |
1 files changed, 0 insertions, 112 deletions
diff --git a/peripheral/libmraa/docs/grossetete.md b/peripheral/libmraa/docs/grossetete.md deleted file mode 100644 index 47ac0bb..0000000 --- a/peripheral/libmraa/docs/grossetete.md +++ /dev/null @@ -1,112 +0,0 @@ -Grosse Tete {#grossetete} -=========== - -The Grosse Tete with the Tuchuck board is supported by Mraa - -Revision Support ----------------- -Tuchuck - -Interface notes ---------------- - -**SPI** Currently not working - -**UART** Some pins are labelled as UARTs but are not configured in BIOS as UART -so only available UART is on the FTDI header - -Pin Mapping ------------ - -Tuchuck has two breakouts, breakout #1 is 1-40 whilst breakout2 is 41-80. The -LEDs are numbered from 100-103. - -| MRAA Number | Physical Pin | Function | -|-------------|--------------|----------| -| 1 | GPIO | GPIO | -| 2 | SPP1RX | GPIO | -| 3 | PMICRST | NONE | -| 4 | SPP1TX | GPIO | -| 5 | 19.2mhz | GPIO | -| 6 | SPP1FS0 | GPIO | -| 7 | UART0TX | GPIO | -| 8 | SPP1FS2 | GPIO | -| 9 | PWRGD | NONE | -| 10 | SPP1CLK | GPIO | -| 11 | I2C0SDA | I2C | -| 12 | I2S1SDI | GPIO | -| 13 | I2C0SCL | I2C | -| 14 | I2S1SDO | GPIO | -| 15 | I2C1SDA | I2C | -| 16 | I2S1WS | GPIO | -| 17 | I2C1SCL | I2C | -| 18 | I2S1CLK | GPIO | -| 19 | I2C2SDA | I2C | -| 20 | I2S1MCL | GPIO | -| 21 | I2C2SCL | I2CO | -| 22 | UART1TX | UART | -| 23 | I2S4SDO | NONE | -| 24 | UART1RX | UART | -| 25 | I2S4SDI | NONE | -| 26 | PWM0 | GPIO PWM | -| 27 | I2S4BLK | GPIO | -| 28 | PWM1 | GPIO PWM | -| 29 | I2S4WS | NONE | -| 30 | PWM2 | GPIO PWM | -| 31 | I2S3SDO | NONE | -| 32 | PWM3 | GPIO PWM | -| 33 | I2S3SDI | NONE | -| 34 | 1.8V | NONE | -| 35 | I2S4BLK | GPIO | -| 36 | GND | NONE | -| 37 | GND | NONE | -| 38 | GND | NONE | -| 39 | GND | NONE | -| 40 | 3.3V | NONE | -| 41 | GND | NONE | -| 42 | 5V | NONE | -| 43 | GND | NONE | -| 44 | 5V | NONE | -| 45 | GND | NONE | -| 46 | 3.3V | NONE | -| 47 | GND | NONE | -| 48 | 3.3V | NONE | -| 49 | GND | NONE | -| 50 | 1.8V | NONE | -| 51 | GPIO | GPIO | -| 52 | 1.8V | NONE | -| 53 | PANEL | GPIO | -| 54 | GND | NONE | -| 55 | PANEL | GPIO | -| 56 | CAMERA | NONE | -| 57 | PANEL | GPIO | -| 58 | CAMERA | NONE | -| 59 | SPP0FS0 | GPIO | -| 60 | CAMERA | NONE | -| 61 | SPP0FS1 | GPIO | -| 62 | SPI_DAT | SPI | -| 63 | SPP0FS2 | GPIO | -| 64 | SPICLKB | GPIO SPI | -| 65 | SPP0FS3 | GPIO | -| 66 | SPICLKA | GPIO SPI | -| 67 | SPP0TX | GPIO | -| 68 | UART0RX | GPIO UART| -| 69 | SPP0RX | GPIO | -| 70 | UART0RT | GPIO UART| -| 71 | I2C1SDA | GPIO I2C | -| 72 | UART0CT | GPIO UART| -| 73 | I2C1SCL | GPIO I2C | -| 74 | UART1TX | GPIO UART| -| 75 | I2C2SDA | GPIO I2C | -| 76 | UART1RX | GPIO UART| -| 77 | I2C1SCL | GPIO I2C | -| 78 | UART1RT | GPIO UART| -| 79 | RTC_CLK | GPIO | -| 80 | UART1CT | GPIO UART| -| 100 | LED100 | GPIO | -| 101 | LED101 | GPIO | -| 102 | LED102 | GPIO | -| 103 | LED103 | GPIO | - -To see a live pin mapping use the command: -$ mraa-gpio list |