summaryrefslogtreecommitdiff
path: root/peripheral/libupm/src/nrf8001/aci_setup.cxx
diff options
context:
space:
mode:
Diffstat (limited to 'peripheral/libupm/src/nrf8001/aci_setup.cxx')
-rw-r--r--peripheral/libupm/src/nrf8001/aci_setup.cxx177
1 files changed, 0 insertions, 177 deletions
diff --git a/peripheral/libupm/src/nrf8001/aci_setup.cxx b/peripheral/libupm/src/nrf8001/aci_setup.cxx
deleted file mode 100644
index dca6d4e..0000000
--- a/peripheral/libupm/src/nrf8001/aci_setup.cxx
+++ /dev/null
@@ -1,177 +0,0 @@
-/* Copyright (c) 2014, Nordic Semiconductor ASA
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-
-#include "aci.h"
-#include "hal_aci_tl.h"
-#include <lib_aci.h>
-#include "aci_setup.h"
-
-
-// aci_struct that will contain
-// total initial credits
-// current credit
-// current state of the aci (setup/standby/active/sleep)
-// open remote pipe pending
-// close remote pipe pending
-// Current pipe available bitmap
-// Current pipe closed bitmap
-// Current connection interval, slave latency and link supervision timeout
-// Current State of the the GATT client (Service Discovery status)
-
-
-// hal_aci_data_t msg_to_send;
-extern hal_aci_data_t msg_to_send;
-
-
-/************************************************************************** */
-/* Utility function to fill the the ACI command queue */
-/* aci_stat Pointer to the ACI state */
-/* num_cmd_offset(in/out) Offset in the Setup message array to start from */
-/* offset is updated to the new index after the queue is filled */
-/* or the last message us placed in the queue */
-/* Returns true if at least one message was transferred */
-/***************************************************************************/
-bool aci_setup_fill(aci_state_t *aci_stat, uint8_t *num_cmd_offset)
-{
- bool ret_val = false;
-
- while (*num_cmd_offset < aci_stat->aci_setup_info.num_setup_msgs)
- {
- //Board dependent defines
- /*#if defined (__AVR__)
- //For Arduino copy the setup ACI message from Flash to RAM.
- memcpy_P(&msg_to_send, &(aci_stat->aci_setup_info.setup_msgs[*num_cmd_offset]),
- pgm_read_byte_near(&(aci_stat->aci_setup_info.setup_msgs[*num_cmd_offset].buffer[0]))+2);
- #elif defined(__PIC32MX__)
- //In ChipKit we store the setup messages in RAM
- //Add 2 bytes to the length byte for status byte, length for the total number of bytes
- memcpy(&msg_to_send, &(aci_stat->aci_setup_info.setup_msgs[*num_cmd_offset]),
- (aci_stat->aci_setup_info.setup_msgs[*num_cmd_offset].buffer[0]+2));
- #endif*/
-
- memcpy(&msg_to_send, &(aci_stat->aci_setup_info.setup_msgs[*num_cmd_offset]),
- (aci_stat->aci_setup_info.setup_msgs[*num_cmd_offset].buffer[0]+2));
-
- //Put the Setup ACI message in the command queue
- if (!hal_aci_tl_send(&msg_to_send))
- {
- //ACI Command Queue is full
- // *num_cmd_offset is now pointing to the index of the Setup command that did not get sent
- return ret_val;
- }
-
- ret_val = true;
-
- (*num_cmd_offset)++;
- }
-
- return ret_val;
-}
-
-uint8_t do_aci_setup(aci_state_t *aci_stat)
-{
- uint8_t setup_offset = 0;
- uint32_t i = 0x0000;
- aci_evt_t * aci_evt = NULL;
- aci_status_code_t cmd_status = ACI_STATUS_ERROR_CRC_MISMATCH;
-
- /*
- We are using the same buffer since we are copying the contents of the buffer
- when queuing and immediately processing the buffer when receiving
- */
- hal_aci_evt_t *aci_data = (hal_aci_evt_t *)&msg_to_send;
-
- /* Messages in the outgoing queue must be handled before the Setup routine can run.
- * If it is non-empty we return. The user should then process the messages before calling
- * do_aci_setup() again.
- */
- if (!lib_aci_command_queue_empty())
- {
- return SETUP_FAIL_COMMAND_QUEUE_NOT_EMPTY;
- }
-
- /* If there are events pending from the device that are not relevant to setup, we return false
- * so that the user can handle them. At this point we don't care what the event is,
- * as any event is an error.
- */
- if (lib_aci_event_peek(aci_data))
- {
- return SETUP_FAIL_EVENT_QUEUE_NOT_EMPTY;
- }
-
- /* Fill the ACI command queue with as many Setup messages as it will hold. */
- aci_setup_fill(aci_stat, &setup_offset);
-
- while (cmd_status != ACI_STATUS_TRANSACTION_COMPLETE)
- {
- /* This counter is used to ensure that this function does not loop forever. When the device
- * returns a valid response, we reset the counter.
- */
- if (i++ > 0xFFFFE)
- {
- return SETUP_FAIL_TIMEOUT;
- }
-
- if (lib_aci_event_peek(aci_data))
- {
- aci_evt = &(aci_data->evt);
-
- if (ACI_EVT_CMD_RSP != aci_evt->evt_opcode)
- {
- //Receiving something other than a Command Response Event is an error.
- return SETUP_FAIL_NOT_COMMAND_RESPONSE;
- }
-
- cmd_status = (aci_status_code_t) aci_evt->params.cmd_rsp.cmd_status;
- switch (cmd_status)
- {
- case ACI_STATUS_TRANSACTION_CONTINUE:
- //As the device is responding, reset guard counter
- i = 0;
-
- /* As the device has processed the Setup messages we put in the command queue earlier,
- * we can proceed to fill the queue with new messages
- */
- aci_setup_fill(aci_stat, &setup_offset);
- break;
-
- case ACI_STATUS_TRANSACTION_COMPLETE:
- //Break out of the while loop when this status code appears
- break;
-
- default:
- //An event with any other status code should be handled by the application
- return SETUP_FAIL_NOT_SETUP_EVENT;
- }
-
- /* If we haven't returned at this point, the event was either ACI_STATUS_TRANSACTION_CONTINUE
- * or ACI_STATUS_TRANSACTION_COMPLETE. We don't need the event itself, so we simply
- * remove it from the queue.
- */
- lib_aci_event_get (aci_stat, aci_data);
- }
- }
-
- return SETUP_SUCCESS;
-}
-
-
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-10 04:43:23 +0000