diff options
author | Ari Hausman-Cohen <arihc@google.com> | 2015-11-04 10:46:00 -0800 |
---|---|---|
committer | Ari Hausman-Cohen <arihc@google.com> | 2015-11-04 22:21:36 +0000 |
commit | 10062029ce85fa07c0b1821f8f2a5f89df0ba00c (patch) | |
tree | c52346d4de20fb5b15de743e011bc0d6938c5aaa | |
parent | 2b17a02a69c6a0d4266c6ad6883e956bbc9be12f (diff) | |
download | qcom-brillo-m7-release.tar.gz |
Cleaning up QCom Binariesbrillo-m7-release
TESTING: Built, provisioned, ran ledflasher
BUG: 25352888
Change-Id: I35bec1a69b8a93c15fc93c8d55f530a95beb5f6e
(cherry picked from commit 584456b6754e161b8aa51b93e7cac240dc989b9a)
-rw-r--r-- | drivers/staging/prima/Android.mk | 115 | ||||
-rw-r--r-- | drivers/staging/prima/firmware_bin/WCNSS_cfg.dat | bin | 11514 -> 0 bytes | |||
-rw-r--r-- | drivers/staging/prima/firmware_bin/WCNSS_qcom_cfg.ini | 462 |
3 files changed, 0 insertions, 577 deletions
diff --git a/drivers/staging/prima/Android.mk b/drivers/staging/prima/Android.mk deleted file mode 100644 index 60cb1321a8c..00000000000 --- a/drivers/staging/prima/Android.mk +++ /dev/null @@ -1,115 +0,0 @@ -# Android makefile for the WLAN Module - -# Assume no targets will be supported -WLAN_CHIPSET := - -# Build/Package options for 8960 target -ifeq ($(TARGET_BOARD_PLATFORM),msm8960) -WLAN_CHIPSET := prima -WLAN_SELECT := CONFIG_PRIMA_WLAN=m -endif - -# Build/Package options for 8916, 8974, 8226, 8610, 8909 targets -ifneq (,$(filter msm8916 msm8974 msm8226 msm8610 msm8909,$(TARGET_BOARD_PLATFORM))) - -WLAN_CHIPSET := pronto -WLAN_SELECT := CONFIG_PRONTO_WLAN=m -endif - -# Build/Package only in case of supported target -ifneq ($(WLAN_CHIPSET),) - -LOCAL_PATH := $(call my-dir) - -# This makefile is only for DLKM -ifneq ($(findstring vendor,$(LOCAL_PATH)),) - -# Determine if we are Proprietary or Open Source -ifneq ($(findstring opensource,$(LOCAL_PATH)),) - WLAN_PROPRIETARY := 0 -else - WLAN_PROPRIETARY := 1 -endif - -ifeq ($(WLAN_PROPRIETARY),1) - WLAN_BLD_DIR := vendor/qcom/proprietary/wlan -else - WLAN_BLD_DIR := vendor/qcom/opensource/wlan -endif - -# DLKM_DIR was moved for JELLY_BEAN (PLATFORM_SDK 16) -ifeq (1,$(filter 1,$(shell echo "$$(( $(PLATFORM_SDK_VERSION) >= 16 ))" ))) - DLKM_DIR := $(TOP)/device/qcom/common/dlkm -else - DLKM_DIR := build/dlkm -endif - -# Copy WCNSS_cfg.dat file from firmware_bin/ folder to target out directory. -ifeq ($(WLAN_PROPRIETARY),0) - -$(shell mkdir -p $(TARGET_OUT_ETC)/firmware/wlan/prima) -$(shell rm -f $(TARGET_OUT_ETC)/firmware/wlan/prima/WCNSS_cfg.dat) -$(shell cp $(LOCAL_PATH)/firmware_bin/WCNSS_cfg.dat $(TARGET_OUT_ETC)/firmware/wlan/prima) - -else - -include $(CLEAR_VARS) -LOCAL_MODULE := WCNSS_qcom_wlan_nv.bin -LOCAL_MODULE_TAGS := optional -LOCAL_MODULE_CLASS := ETC -LOCAL_MODULE_PATH := $(PRODUCT_OUT)/persist -LOCAL_SRC_FILES := firmware_bin/$(LOCAL_MODULE) -include $(BUILD_PREBUILT) - -include $(CLEAR_VARS) -LOCAL_MODULE := WCNSS_cfg.dat -LOCAL_MODULE_TAGS := optional -LOCAL_MODULE_CLASS := ETC -LOCAL_MODULE_PATH := $(TARGET_OUT_ETC)/firmware/wlan/prima -LOCAL_SRC_FILES := firmware_bin/$(LOCAL_MODULE) -include $(BUILD_PREBUILT) - -include $(CLEAR_VARS) -LOCAL_MODULE := WCNSS_qcom_cfg.ini -LOCAL_MODULE_TAGS := optional -LOCAL_MODULE_CLASS := ETC -LOCAL_MODULE_PATH := $(PRODUCT_OUT)/persist -LOCAL_SRC_FILES := firmware_bin/$(LOCAL_MODULE) -include $(BUILD_PREBUILT) - -endif - -# Build wlan.ko as either prima_wlan.ko or pronto_wlan.ko -########################################################### - -# This is set once per LOCAL_PATH, not per (kernel) module -KBUILD_OPTIONS := WLAN_ROOT=../$(WLAN_BLD_DIR)/prima -# We are actually building wlan.ko here, as per the -# requirement we are specifying <chipset>_wlan.ko as LOCAL_MODULE. -# This means we need to rename the module to <chipset>_wlan.ko -# after wlan.ko is built. -KBUILD_OPTIONS += MODNAME=wlan -KBUILD_OPTIONS += BOARD_PLATFORM=$(TARGET_BOARD_PLATFORM) -KBUILD_OPTIONS += $(WLAN_SELECT) - - -VERSION=$(shell grep -w "VERSION =" $(TOP)/kernel/Makefile | sed 's/^VERSION = //' ) -PATCHLEVEL=$(shell grep -w "PATCHLEVEL =" $(TOP)/kernel/Makefile | sed 's/^PATCHLEVEL = //' ) - -include $(CLEAR_VARS) -LOCAL_MODULE := $(WLAN_CHIPSET)_wlan.ko -LOCAL_MODULE_KBUILD_NAME := wlan.ko -LOCAL_MODULE_TAGS := debug -LOCAL_MODULE_DEBUG_ENABLE := true -LOCAL_MODULE_PATH := $(TARGET_OUT)/lib/modules/$(WLAN_CHIPSET) -include $(DLKM_DIR)/AndroidKernelModule.mk -########################################################### - -#Create symbolic link -$(shell mkdir -p $(TARGET_OUT)/lib/modules; \ - ln -sf /system/lib/modules/$(WLAN_CHIPSET)/$(WLAN_CHIPSET)_wlan.ko \ - $(TARGET_OUT)/lib/modules/wlan.ko) - -endif # DLKM check - -endif # supported target check diff --git a/drivers/staging/prima/firmware_bin/WCNSS_cfg.dat b/drivers/staging/prima/firmware_bin/WCNSS_cfg.dat Binary files differdeleted file mode 100644 index 0637816b823..00000000000 --- a/drivers/staging/prima/firmware_bin/WCNSS_cfg.dat +++ /dev/null diff --git a/drivers/staging/prima/firmware_bin/WCNSS_qcom_cfg.ini b/drivers/staging/prima/firmware_bin/WCNSS_qcom_cfg.ini deleted file mode 100644 index f86f9e1e493..00000000000 --- a/drivers/staging/prima/firmware_bin/WCNSS_qcom_cfg.ini +++ /dev/null @@ -1,462 +0,0 @@ -# This file allows user to override the factory - -# defaults for the WLAN Driver - - -# Enable IMPS or not -gEnableImps=1 - -# Enable/Disable Idle Scan - -gEnableIdleScan=0 - - -# Enable/Disable vsta based on MAX Assoc limit -gEnableVSTASupport=1 - - -# Increase sleep duration (seconds) during IMPS -# 0 implies no periodic wake up from IMPS. Periodic wakeup is -# unnecessary if Idle Scan is disabled. -gImpsModSleepTime=0 - - -# Enable BMPS or not -gEnableBmps=1 - -# Enable suspend or not - -# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter - -gEnableSuspend=3 - -# Phy Mode (auto, b, g, n, etc) -# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac -gDot11Mode=0 - - -# CSR Roaming Enable(1) Disable(0) - -gRoamingTime=0 - - -# Assigned MAC Addresses - This will be used until NV items are in place - -# Each byte of MAC address is represented in Hex format as XX - -Intf0MacAddress=000AF58989FF -Intf1MacAddress=000AF58989FE -Intf2MacAddress=000AF58989FD - -Intf3MacAddress=000AF58989FC - - -# UAPSD service interval for VO,VI, BE, BK traffic - -InfraUapsdVoSrvIntv=0 - -InfraUapsdViSrvIntv=0 - -InfraUapsdBeSrvIntv=0 - -InfraUapsdBkSrvIntv=0 - -# Flag to allow STA send AddTspec even when ACM is Off -gAddTSWhenACMIsOff=1 - -# Make 1x1 the default antenna configuration - -gNumRxAnt=1 - - -# Beacon filtering frequency (unit in beacon intervals) - -gNthBeaconFilter=50 - - -# Enable WAPI or not - -# WAPIIsEnabled=0 - - -# Flags to filter Mcast abd Bcast RX packets. - -# Value 0: No filtering, 1: Filter all Multicast. - -# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast - -McastBcastFilter=3 - - -#Flag to enable HostARPOffload feature or not - -hostArpOffload=1 - - -#Flag to enable HostNSOffload feature or not - -hostNSOffload=0 - -#SoftAP Related Parameters - -# AP MAc addr - -gAPMacAddr=000AF589dcab - - -# 802.11n Protection flag - -gEnableApProt=1 - - -#Enable OBSS protection - -gEnableApOBSSProt=1 - - -#Enable/Disable UAPSD for SoftAP - -gEnableApUapsd=1 - - -# Fixed Rate - -gFixedRate=0 - - -# Maximum Tx power - -# gTxPowerCap=30 - - -# Fragmentation Threshold - -# gFragmentationThreshold=2346 - - -# RTS threshold - -RTSThreshold=2347 - - -# Intra-BSS forward - -gDisableIntraBssFwd=0 - - -# WMM Enable/Disable - -WmmIsEnabled=0 - - -# 802.11d support - -g11dSupportEnabled=1 - -# 802.11h support - -g11hSupportEnabled=1 - -# ESE Support and fast transition -EseEnabled=0 -ImplicitQosIsEnabled=0 -gNeighborScanTimerPeriod=200 - -gNeighborLookupThreshold=76 -gNeighborReassocThreshold=81 - -gNeighborScanChannelMinTime=20 -gNeighborScanChannelMaxTime=30 -gMaxNeighborReqTries=3 - -# Legacy (non-ESE, non-802.11r) Fast Roaming Support -# To enable, set FastRoamEnabled=1 -# To disable, set FastRoamEnabled=0 -FastRoamEnabled=1 - -#Check if the AP to which we are roaming is better than current AP in terms of RSSI. -#Checking is disabled if set to Zero.Otherwise it will use this value as to how better -#the RSSI of the new/roamable AP should be for roaming -RoamRssiDiff=3 - -# If the RSSI of any available candidate is better than currently associated -# AP by at least gImmediateRoamRssiDiff, then being to roam immediately (without -# registering for reassoc threshold). -# NOTE: Value of 0 means that we would register for reassoc threshold. -gImmediateRoamRssiDiff=10 - -# To enable, set gRoamIntraBand=1 (Roaming within band) -# To disable, set gRoamIntraBand=0 (Roaming across band) - -gRoamIntraBand=0 - -#SAP Country code - -# Default Country Code is 2 bytes, 3rd byte is optional indoor or out door. - -# Example - -# US Indoor, USI - -# Korea Outdoor, KRO - -# Japan without optional byte, JP - -# France without optional byte, FR - -#gAPCntryCode=USI - - -#Short Guard Interval Enable/disable - -gShortGI20Mhz=1 - -gShortGI40Mhz=1 - - -#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled - -gAPAutoShutOff=0 - - -# SAP auto channel selection configuration - -# 0 = disable auto channel selection - -# 1 = enable auto channel selection, channel provided by supplicant will be ignored - -gApAutoChannelSelection=1 - - -# Listen Energy Detect Mode Configuration - -# Valid values 0-128 - -# 128 means disable Energy Detect feature - -# 0-9 are threshold code and 7 is recommended value from system if feature is to be enabled. - -# 10-128 are reserved. - -# The EDET threshold mapping is as follows in 3dB step: - -# 0 = -60 dBm - -# 1 = -63 dBm - -# 2 = -66 dBm - -# ... - -# 7 = -81 dBm - -# 8 = -84 dBm - -# 9 = -87 dBm - -# Note: Any of these settings are valid. Setting 0 would yield the highest power saving (in a noisy environment) at the cost of more range. The range impact is approximately #calculated as: - -# - -# Range Loss (dB) = EDET threshold level (dBm) + 97 dBm. - -# - -gEnablePhyAgcListenMode=128 - - -#Preferred channel to start BT AMP AP mode (0 means, any channel) - -BtAmpPreferredChannel=0 - - -#Preferred band (both or 2.4 only or 5 only) - -BandCapability=0 - - -#Beacon Early Termination (1 = enable the BET feature, 0 = disable) - -enableBeaconEarlyTermination=0 - -beaconEarlyTerminationWakeInterval=3 - - -#Bluetooth Alternate Mac Phy (1 = enable the BT AMP feature, 0 = disable) - -gEnableBtAmp=0 - - -#SOFTAP Channel Range selection - -gAPChannelSelectStartChannel=1 - -gAPChannelSelectEndChannel=11 - - -#SOFTAP Channel Range selection Operating band - -# 0:2.4GHZ 1: LOW-5GHZ 2:MID-5GHZ 3:HIGH-5GHZ 4: 4.9HZ BAND - -gAPChannelSelectOperatingBand=0 - - -#Channel Bonding -gChannelBondingMode5GHz=1 -gChannelBondingMode24GHz=1 - -#Enable Keep alive with non-zero period value - -#gStaKeepAlivePeriod = 30 - -#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds). -#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link is idle for last 10 seconds.) -#For both active and power save clients. - -#Power save clients: DUT set TIM bit from 10th second onwards and till client honors TIM bit. -#If doesn't honor for 5 seconds then DUT remove client. - -#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not success still we try on -#11th second if not tries on 12th and so on till 15th second. Hence before disconnection DUT will send 5 NULL frames. -#Hence in any case DUT will detect client got removed in (10+5) seconds. i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod).. - -#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and it is period -#where we send NULL frame. - -#gApLinkMonitorPeriod = 10 - -#gGoLinkMonitorPeriod = 10 - -#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame are succeed to send or not. -#Hence total effective detection time is gGoLinkMonitorPeriod+ gGoKeepAlivePeriod/gApLinkMonitorPeriod+ gApKeepAlivePeriod. - - -gGoKeepAlivePeriod=30 - -gApKeepAlivePeriod=10 - - -#If set will start with active scan after driver load, otherwise will start with - -#passive scan to find out the domain - -gEnableBypass11d=1 - - -#If set to 0, will not scan DFS channels - -gEnableDFSChnlScan=1 - - -gVhtChannelWidth=2 -gEnableLogp=1 - - -# Enable Automatic Tx Power control - -gEnableAutomaticTxPowerControl=0 - -# 0 for OLPC 1 for CLPC and SCPC -gEnableCloseLoop=1 - -#Data Inactivity Timeout when in powersave (in ms) -gDataInactivityTimeout=200 - -# VHT Tx/Rx MCS values -# Valid values are 0,1,2. If commented out, the default value is 0. -# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 -gVhtRxMCS=2 -gVhtTxMCS=2 - -# Enable CRDA regulatory support by settings default country code -#gCrdaDefaultCountryCode=TW - -# Scan Timing Parameters -# gPassiveMaxChannelTime=110 -# gPassiveMinChannelTime=60 -# gActiveMaxChannelTime=40 -# gActiveMinChannelTime=20 - -#If set to 0, MCC is not allowed. -gEnableMCCMode=1 - -# 1=enable STBC; 0=disable STBC -gEnableRXSTBC=1 - -# Enable Active mode offload -gEnableActiveModeOffload=1 - -#Enable Scan Results Aging based on timer -#Timer value is in seconds -#If Set to 0 it will not enable the feature -gScanAgingTime=0 - -#Enable Power saving mechanism Based on Android Framework -#If set to 0 Driver internally control the Power saving mechanism -#If set to 1 Android Framwrok control the Power saving mechanism -isAndroidPsEn=0 - -#disable LDPC in STA mode if the AP is TXBF capable -gDisableLDPCWithTxbfAP=1 - -#Enable thermal mitigation -gThermalMitigationEnable=1 - -gEnableFastRoamInConcurrency=1 - -#List of Country codes for which 11ac needs to be disabled -#Each country code must be delimited by comma(,) -gListOfNon11acCountryCode=RU,UA,ZA - -#Maxium Channel time in msec -gMaxMediumTime = 5480 - -# 802.11K support -gRrmEnable=1 -gRrmOperChanMax=8 -gRrmNonOperChanMax=8 -gRrmRandIntvl=100 - -#Scan offload -gEnableDirectedScanOffload=0 - -#FlexConnect Power Factor -#Default is set to 0 (disable) -gFlexConnectPowerFactor=0 - -#SAP/P2P-GO mode traffic monitor -gEnableTrafficMonitor=1 -gTrafficIdleTimeout=3000 - -#Disable/Enable Strict FCC Regulatory -# 0 to disable, 1 to enable -gEnableStrictRegulatoryForFCC=1 - -#Enable/Disable Modulated DTIM feature -gEnableModulatedDTIM=3 - -#max LI value for modulated DTIM -gMaxLIModulatedDTIM=3 - -#Enable/Disable Link Layer Statistics Feature -gEnableLLStats=1 - -#Enable/Disable EXTScan Feature -gEnableEXTScan=1 - -#Enable/Disable RTS-CTS for HT,VHT -#Bit mask value to enable RTS/CTS for different modes -#For 2.4 GHz, HT20 - 0x0001 i.e 1, for 2.4 GHz, HT40 - 0x0002 i.e 2 -#For 2.4 GHz, VHT20 - 0x0004 i.e 4, for 2.4 GHz, VHT40 - 0x0008 i.e 8 -#For 5 GHz, HT20 - 0x0100 i.e 256, for 5 GHz, HT40 - 0x0200 i.e 512 -#For 5 GHz, VHT20 - 0x0400 i.e 1024, for 5 GHz, VHT40 - 0x0800 i.e 2048 -#For 5 GHz, VHT80 - 0x1000 i.e 4096 -#Can be enabled for multiple modes -#For enabling in both HT20 and HT40 of 2.4 GHz - 0x0003 i.e 3 -#Default is set to 0 (disable) -gEnableRtsCtsHtVht=0 - -END - -# Note: Configuration parser would not read anything past the END marker - |