diff options
Diffstat (limited to 'MakefileBasedBuild/Atmel/sam3x/sam3x-ek/libraries/usb_device/class/dfu/device/atmel/isp/avr32/at32uc3c/iar/lnkat32uc3c-isp.xcl')
| -rw-r--r-- | MakefileBasedBuild/Atmel/sam3x/sam3x-ek/libraries/usb_device/class/dfu/device/atmel/isp/avr32/at32uc3c/iar/lnkat32uc3c-isp.xcl | 150 |
1 files changed, 0 insertions, 150 deletions
diff --git a/MakefileBasedBuild/Atmel/sam3x/sam3x-ek/libraries/usb_device/class/dfu/device/atmel/isp/avr32/at32uc3c/iar/lnkat32uc3c-isp.xcl b/MakefileBasedBuild/Atmel/sam3x/sam3x-ek/libraries/usb_device/class/dfu/device/atmel/isp/avr32/at32uc3c/iar/lnkat32uc3c-isp.xcl deleted file mode 100644 index e0e450b..0000000 --- a/MakefileBasedBuild/Atmel/sam3x/sam3x-ek/libraries/usb_device/class/dfu/device/atmel/isp/avr32/at32uc3c/iar/lnkat32uc3c-isp.xcl +++ /dev/null @@ -1,150 +0,0 @@ -/******************************************************************************
- * AVR32 AT32UC3C ISP XLINK command file for AVR32 IAR C/C++ Compiler.
- *
- * The assumed memory layout is the one of the AT32UC3C0512:
- *
- * Start Stop Name Type
- * ---------- ---------- ----- --------------
- * 0x00000000 0x0000FFFF SRAM RAM
- * 0x80000000 0x8007FFFF FLASH FLASH
- * 0x80800000 0x808001FF USER FLASH
- *
- * Usage: xlink your_file(s) -f xcl-file libraries
- *
- * - Compiler: IAR EWAVR32
- * - Supported devices: AVR32 AT32UC3C
- *
- * - author Atmel Corporation: http://www.atmel.com \n
- * Support and FAQ: http://support.atmel.no/
- *
- ******************************************************************************/
-
-/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an Atmel
- * AVR product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
- *
- */
-
-/************************************************************************/
-/* The following segments are defined in this link file: */
-/* */
-/* Code segments */
-/* CODE32 -- Program code used by __code32 functions. */
-/* RESET -- Reset code. */
-/* EVSEG -- Exception vector handlers. */
-/* */
-/* Constant segments */
-/* INITTAB -- Segment initializer table. */
-/* DIFUNCT -- Dynamic initialization vector used by C++. */
-/* SWITCH -- Switch tables. */
-/* ACTAB -- Table of pointers to acall functions. */
-/* */
-/* DATA21_ID -- Initialization data for DATA21_I. */
-/* DATA32_ID -- Initialization data for DATA32_I. */
-/* DATA32_C -- Constant __data32 data. */
-/* */
-/* CHECKSUM -- Checksum segment. */
-/* */
-/* Data segments */
-/* DATA21_I -- Initialized __data21 data with non-zero */
-/* initial value. */
-/* DATA32_I -- Initialized __data32 data with non-zero */
-/* initial value. */
-/* DATA21_Z -- Initialized __data21 data with zero initial value. */
-/* DATA32_Z -- Initialized __data32 data with zero initial value. */
-/* DATA21_N -- Non-initialized __data21. */
-/* DATA32_N -- Non-initialized __data32. */
-/* SSTACK -- The system stack. */
-/* CSTACK -- The application stack. */
-/* HEAP -- The heap used by malloc and free. */
-/* */
-/************************************************************************/
-
-/************************************************************************/
-/* Define CPU */
-/************************************************************************/
-
--cavr32
-
-/************************************************************************/
-/* Reset code is located at address 0x80000000 and up. */
-/************************************************************************/
-
--Z(CODE)RESET=80000000-8007FFFF
-
-/************************************************************************/
-/* The exception handler code is located at address 0x80000000 */
-/* and up. Make sure that the exception table gets properly */
-/* allocated. By using the special -Z@ allocation primitive, the */
-/* placement is guaranteed to be at _EVBASE and onwards. */
-/************************************************************************/
-
--Z@(CODE)EVTAB=80000000-8007FFFF
--Z@(CODE)EV100=80000100-8007FFFF
--P(CODE)EVSEG=80000000-8007FFFF
-
-/************************************************************************/
-/* Allocate code and const segments. */
-/************************************************************************/
-
--P(CODE)CODE32=80000000-8007FFFF
--P(CONST)DATA32_C=80000000-8007FFFF
--P(CONST)USERDATA32_C=80800000-808001FF
-
-// Initializers
--Z(CONST)INITTAB,DIFUNCT=80000000-8007FFFF
--Z(CONST)CHECKSUM,SWITCH=80000000-8007FFFF
--Z(CONST)DATA21_ID,DATA32_ID=80000000-8007FFFF
--Z(CONST)RAMCODE21_ID,RAMCODE32_ID=80000000-8007FFFF
-
--Z(CONST)ACTAB,HTAB=80000000-8007FFFF
-
-/************************************************************************/
-/* Allocate the read/write segments that are mapped to RAM. */
-/************************************************************************/
-
--Z(CODE)RAMCODE21=00000004-0000FFFF
--Z(DATA)DATA21_I,DATA21_Z,DATA21_N=00000004-0000FFFF
--Z(CODE)RAMCODE32=00000004-0000FFFF
--Z(DATA)DATA32_I,DATA32_Z,DATA32_N=00000004-0000FFFF
--Z(DATA)TRACEBUFFER=00000004-0000FFFF
-
--Z(DATA)HEAP+_HEAP_SIZE=00000004-0000FFFF
--Z(DATA)CSTACK+_CSTACK_SIZE=00000004-0000FFFF
--Z(DATA)SSTACK+_SSTACK_SIZE=00000004-0000FFFF
-
-/************************************************************************/
-/* Copy the RAMCODE bytes to the initializer segments. */
-/************************************************************************/
-
--QRAMCODE21=RAMCODE21_ID
--QRAMCODE32=RAMCODE32_ID
-
-/************************************************************************/
-/* End of File */
-/************************************************************************/
|