1 files changed, 0 insertions, 104 deletions
diff --git a/MakefileBasedBuild/Atmel/sam3x/sam3x-ek/libraries/usb_device/class/msc/device/example/atxmega128a1_stk600-rc100x/ui.c b/MakefileBasedBuild/Atmel/sam3x/sam3x-ek/libraries/usb_device/class/msc/device/example/atxmega128a1_stk600-rc100x/ui.c
deleted file mode 100644
index a4c4b98..0000000
--- a/MakefileBasedBuild/Atmel/sam3x/sam3x-ek/libraries/usb_device/class/msc/device/example/atxmega128a1_stk600-rc100x/ui.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/**
- * \file
- *
- * \brief User Interface
- *
- * Copyright (C) 2009 Atmel Corporation. All rights reserved.
- *
- * \page License
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an
- * Atmel AVR product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- */
-
-#include "compiler.h"
-#include "conf_usb.h"
-#include "udi_msc.h"
-#include "board.h"
-#include "led.h"
-#include "ui.h"
-
-void ui_init(void)
-{
-	LED_On(LED0_GPIO);
-	LED_Off(LED1_GPIO);
-}
-
-void ui_powerdown(void)
-{
-	LED_Off(LED0_GPIO);
-	LED_Off(LED1_GPIO);
-}
-
-void ui_wakeup(void)
-{
-	LED_On(LED0_GPIO);
-}
-
-void ui_start_read(void)
-{
-	LED_On(LED2_GPIO);
-}
-
-void ui_stop_read(void)
-{
-	LED_Off(LED2_GPIO);
-}
-
-void ui_start_write(void)
-{
-	LED_On(LED3_GPIO);
-}
-
-void ui_stop_write(void)
-{
-	LED_Off(LED3_GPIO);
-}
-
-void ui_process(uint16_t framenumber)
-{
-	if ((framenumber % 1000) == 0) {
-		LED_On(LED1_GPIO);
-	}
-	if ((framenumber % 1000) == 500) {
-		LED_Off(LED1_GPIO);
-	}
-}
-
-
-/**
- * \defgroup UI User Iinterface
- *
- * Human interface on STK600:
- * - RED led close to USB connector is always on after firmware startup
- * - Led 0 is on when USB line is in IDLE mode, and off in SUSPEND mode
- * - Led 1 blinks when USB Host have checked and enabled MSC interface
- * - Led 2 is on during read operation
- * - Led 3 is on during write operation
- *
- */