1 files changed, 0 insertions, 198 deletions
diff --git a/MakefileBasedBuild/app/Makefile b/MakefileBasedBuild/app/Makefile
deleted file mode 100644
index bd2bbbe..0000000
--- a/MakefileBasedBuild/app/Makefile
+++ /dev/null
@@ -1,198 +0,0 @@
-# ----------------------------------------------------------------------------
-#         ATMEL Microcontroller Software Support 
-# ----------------------------------------------------------------------------
-# Copyright (c) 2010, Atmel Corporation
-#
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-
-# modification, are permitted provided that the following conditions are met:
-#
-# - Redistributions of source code must retain the above copyright notice,
-# this list of conditions and the disclaimer below.
-#
-# Atmel's name may not be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-# DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-# OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# ----------------------------------------------------------------------------
-
-#   Makefile for compiling the ADC12 Example project
-
-#-------------------------------------------------------------------------------
-#        User-modifiable options
-#-------------------------------------------------------------------------------
-
-# Chip & board used for compilation
-# (can be overriden by adding CHIP=chip and BOARD=board to the command-line)
-CHIP  = sam3x8
-BOARD = sam3x_ek
-
-# Defines which are the available memory targets for the SAM3S-EK board.
-MEMORIES = flash #sram
-
-# Trace level used for compilation
-# (can be overriden by adding TRACE_LEVEL=#number to the command-line)
-# TRACE_LEVEL_DEBUG      5
-# TRACE_LEVEL_INFO       4
-# TRACE_LEVEL_WARNING    3
-# TRACE_LEVEL_ERROR      2
-# TRACE_LEVEL_FATAL      1
-# TRACE_LEVEL_NO_TRACE   0
-TRACE_LEVEL = 4
-
-# Optimization level, put in comment for debugging
-OPTIMIZATION = -O2
-
-# Output file basename
-OUTPUT = test_$(BOARD)_$(CHIP)
-
-# Output directories
-BIN = bin
-OBJ = obj
-
-#-------------------------------------------------------------------------------
-#		Tools
-#-------------------------------------------------------------------------------
-
-# Tool suffix when cross-compiling
-CROSS_COMPILE = arm-none-eabi-
-
-# Libraries
-LIBRARIES = ../Atmel/sam3x/sam3x-ek/libraries
-# Chip library directory
-CHIP_LIB = $(LIBRARIES)/libchip_sam3x
-# Board library directory
-BOARD_LIB = $(LIBRARIES)/libboard_sam3x-ek
-# USB library directory
-USB_LIB = $(LIBRARIES)/usb
-
-LIBS = -Wl,--start-group -lgcc -lc -lchip_$(CHIP)_gcc_rel -lboard_$(BOARD)_gcc_rel -Wl,--end-group
-
-LIB_PATH = -L$(CHIP_LIB)/lib
-LIB_PATH += -L$(BOARD_LIB)/lib
-LIB_PATH+=-L=/lib/thumb2
-LIB_PATH+=-L=/../lib/gcc/arm-none-eabi/4.4.1/thumb2
-
-# Compilation tools
-CC = $(CROSS_COMPILE)gcc
-LD = $(CROSS_COMPILE)ld
-SIZE = $(CROSS_COMPILE)size
-STRIP = $(CROSS_COMPILE)strip
-OBJCOPY = $(CROSS_COMPILE)objcopy
-OBJDUMP = $(CROSS_COMPILE)objdump
-GDB = $(CROSS_COMPILE)gdb
-NM = $(CROSS_COMPILE)nm
-
-# Flags
-INCLUDES  = -I$(CHIP_LIB)
-INCLUDES += -I$(BOARD_LIB)
-INCLUDES += -I$(LIBRARIES)
-INCLUDES += -I.
-
-CFLAGS += -fno-strict-aliasing
-CFLAGS += -Wall -Wchar-subscripts -Wcomment -Wformat=2 -Wimplicit-int
-CFLAGS += -Werror-implicit-function-declaration -Wmain -Wparentheses
-CFLAGS += -Wsequence-point -Wreturn-type -Wswitch -Wtrigraphs
-CFLAGS += -Wuninitialized -Wunknown-pragmas -Wfloat-equal -Wundef
-CFLAGS += -Wshadow -Wpointer-arith -Wbad-function-cast -Wwrite-strings
-CFLAGS += -Wsign-compare -Waggregate-return -Wstrict-prototypes
-CFLAGS += -Wmissing-prototypes -Wmissing-declarations
-CFLAGS += -Wformat -Wmissing-format-attribute -Wno-deprecated-declarations
-CFLAGS += -Wredundant-decls -Wnested-externs -Winline -Wlong-long
-CFLAGS += -Wno-unused
-#CFLAGS += -Wunreachable-code
-CFLAGS += -Wcast-align
-#CFLAGS += -Wmissing-noreturn
-#CFLAGS += -Wconversion
-
-# To reduce application size use only integer printf function.
-CFLAGS += -Dprintf=iprintf
-
-# -mlong-calls  -Wall
-CFLAGS += --param max-inline-insns-single=500 -mcpu=cortex-m3 -mthumb -ffunction-sections
-CFLAGS += -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -DTRACE_LEVEL=$(TRACE_LEVEL)
-ASFLAGS = -mcpu=cortex-m3 -mthumb -Wall -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -D__ASSEMBLY__
-LDFLAGS= -mcpu=cortex-m3 -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=ResetException -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--warn-unresolved-symbols
-#LD_OPTIONAL=-Wl,--print-gc-sections -Wl,--stats
-
-#-------------------------------------------------------------------------------
-#		Files
-#-------------------------------------------------------------------------------
-
-# Directories where source files can be found
-
-VPATH += ./
-
-# Objects built from C source files
-C_OBJECTS += main.o BT.o I2C.o baro.o fwk.o als.o mag.o accel.o hygro.o LEDs.o printf.o dbg.o Audio.o coop.o
-C_OBJECTS += SD.o simpleOgg.o RTC.o btSDP.o btRFCOMM.o sgBuf.o btL2CAP.o eliza.o capsense.o btA2DP.o ADK.o
-C_OBJECTS += usb_drv.o f_ff.o f_sdDisk.o v_bitwise.o v_codebook.o v_dsp.o v_floor0.o accessory.o usbh.o
-C_OBJECTS += v_floor1.o v_floor_lookup.o v_framing.o v_info.o v_mapping0.o v_mdct.o v_misc.o v_res012.o
-C_OBJECTS += v_vorbisfile.o
-
-# Append OBJ and BIN directories to output filename
-OUTPUT := $(BIN)/$(OUTPUT)
-LIBS += $(A_OBJECTS)
-DEPS :=
-
-#-------------------------------------------------------------------------------
-#		Rules
-#-------------------------------------------------------------------------------
-
-all: libchip_$(CHIP)_gcc_rel.a libboard_$(BOARD)_gcc_rel.a $(BIN) $(OBJ) $(MEMORIES)
-
-libchip_$(CHIP)_gcc_rel.a:
-	$(MAKE) -C $(CHIP_LIB)/build/gcc $(CHIP)
-
-libboard_$(BOARD)_gcc_rel.a:
-	$(MAKE) -C $(BOARD_LIB)/build/gcc $(BOARD)
-
-$(BIN) $(OBJ): $(A_OBJECTS)
-	mkdir $@ || true
-
-%.d:
-
-define RULES
-C_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(C_OBJECTS))
-ASM_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(ASM_OBJECTS))
-DEPS += $(addprefix $(OBJ)/$(1)_, $(C_OBJECTS:.o=.d))
-
-$(1): $$(ASM_OBJECTS_$(1)) $$(C_OBJECTS_$(1))
-	@echo mkdir -p $$(dir $$@)
-	@$(CC) $(LIB_PATH) $(LDFLAGS) $(LD_OPTIONAL) -T"$(BOARD_LIB)/resources/gcc/$(CHIP)/$$@.ld" -Wl,-Map,$(OUTPUT)-$$@.map -o $(OUTPUT)-$$@.elf $$^ $(LIBS)
-	$(NM) $(OUTPUT)-$$@.elf >$(OUTPUT)-$$@.elf.txt
-	$(OBJCOPY) -O binary $(OUTPUT)-$$@.elf $(OUTPUT)-$$@.bin
-	$(OBJDUMP) -d $(OUTPUT)-$$@.elf > $(OUTPUT)-$$@.lst
-	$(SIZE) $$^ $(OUTPUT)-$$@.elf
-
-$$(C_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.c
-	@mkdir -p $$(dir $$@)
-	@$(CC) $(CFLAGS) -D$(1) -c -MD -MT $$@ -MF $$(@:%o=%d) -o $$@ $$<
-
-$$(ASM_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.S
-	@mkdir -p $$(dir $$@)
-	@$(CC) $(ASFLAGS) -D$(1) -c -MD -MT $$@ -MF $$(@:%o=%d) -o $$@ $$<
-
-debug_$(1): $(1)
-	$(GDB) -x "$(BOARD_LIB)/resources/gcc/$(BOARD)_$(1).gdb" -ex "reset" -readnow -se $(OUTPUT)-$(1).elf
-endef
-
-$(foreach MEMORY, $(MEMORIES), $(eval $(call RULES,$(MEMORY))))
-
-clean:
-	rm -fR $(OBJ) $(BIN)
-
-ifeq ($(filter $(MAKECMDGOALS), clean), )
--include $(DEPS)
-endif