Revert "Adding the header file for copybit"linaro_android_4.0.4_snowball

This reverts commit f0db1c8e317b655f9b79e7e1a92e889ad3edfef7.

1 files changed, 0 insertions, 256 deletions

diff --git a/include/hardware/copybit.h b/include/hardware/copybit.h
deleted file mode 100644
index 93547b74..00000000
--- a/include/hardware/copybit.h
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * Copyright (C) 2008 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef ANDROID_COPYBIT_INTERFACE_H
-#define ANDROID_COPYBIT_INTERFACE_H
-
-#include <hardware/hardware.h>
-
-#include <stdint.h>
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-__BEGIN_DECLS
-
-/**
- * The id of this module
- */
-#define COPYBIT_HARDWARE_MODULE_ID "copybit"
-
-/**
- * Name of the graphics device to open
- */
-#define COPYBIT_HARDWARE_COPYBIT0 "copybit0"
-
-/* supported pixel-formats. these must be compatible with
- * graphics/PixelFormat.java, ui/PixelFormat.h, pixelflinger/format.h
- */
-enum {
-    COPYBIT_FORMAT_RGBA_8888    = HAL_PIXEL_FORMAT_RGBA_8888,
-    COPYBIT_FORMAT_RGBX_8888    = HAL_PIXEL_FORMAT_RGBX_8888,
-    COPYBIT_FORMAT_RGB_888      = HAL_PIXEL_FORMAT_RGB_888,
-    COPYBIT_FORMAT_RGB_565      = HAL_PIXEL_FORMAT_RGB_565,
-    COPYBIT_FORMAT_BGRA_8888    = HAL_PIXEL_FORMAT_BGRA_8888,
-    COPYBIT_FORMAT_RGBA_5551    = HAL_PIXEL_FORMAT_RGBA_5551,
-    COPYBIT_FORMAT_RGBA_4444    = HAL_PIXEL_FORMAT_RGBA_4444,
-    COPYBIT_FORMAT_YCbCr_422_SP = HAL_PIXEL_FORMAT_YCbCr_422_SP,
-    COPYBIT_FORMAT_YCbCr_420_SP = HAL_PIXEL_FORMAT_YCbCr_420_SP,
-    COPYBIT_FORMAT_YCbCr_422_P  = HAL_PIXEL_FORMAT_YCbCr_422_P,
-    COPYBIT_FORMAT_YCbCr_420_P  = HAL_PIXEL_FORMAT_YCbCr_420_P,
-    COPYBIT_FORMAT_YCrCb_422_SP = HAL_PIXEL_FORMAT_YCrCb_422_SP,
-    COPYBIT_FORMAT_YCrCb_420_SP = HAL_PIXEL_FORMAT_YCrCb_420_SP,
-    COPYBIT_FORMAT_YCrCb_422_P  = HAL_PIXEL_FORMAT_YCrCb_422_P,
-    COPYBIT_FORMAT_YCrCb_420_P  = HAL_PIXEL_FORMAT_YCrCb_420_P,
-    /* STE: Added Support for YUV42XMBN, required for Copybit CC acceleration */
-    COPYBIT_FORMAT_YCBCR42XMBN  = HAL_PIXEL_FORMAT_YCBCR42XMBN,
-    /* STE: Added for YCbCr422R -> RGB888 use-case */
-    COPYBIT_FORMAT_YCbCr_422_I  = HAL_PIXEL_FORMAT_YCbCr_422_I,
-};
-
-/* name for copybit_set_parameter */
-enum {
-    /* rotation of the source image in degrees (0 to 359) */
-    COPYBIT_ROTATION_DEG    = 1,
-    /* plane alpha value */
-    COPYBIT_PLANE_ALPHA     = 2,
-    /* enable or disable dithering */
-    COPYBIT_DITHER          = 3,
-    /* transformation applied (this is a superset of COPYBIT_ROTATION_DEG) */
-    COPYBIT_TRANSFORM       = 4,
-    /* blurs the copied bitmap. The amount of blurring cannot be changed
-     * at this time. */
-    COPYBIT_BLUR            = 5
-};
-
-/* values for copybit_set_parameter(COPYBIT_TRANSFORM) */
-enum {
-    /* flip source image horizontally */
-    COPYBIT_TRANSFORM_FLIP_H    = HAL_TRANSFORM_FLIP_H,
-    /* flip source image vertically */
-    COPYBIT_TRANSFORM_FLIP_V    = HAL_TRANSFORM_FLIP_V,
-    /* rotate source image 90 degres */
-    COPYBIT_TRANSFORM_ROT_90    = HAL_TRANSFORM_ROT_90,
-    /* rotate source image 180 degres */
-    COPYBIT_TRANSFORM_ROT_180   = HAL_TRANSFORM_ROT_180,
-    /* rotate source image 270 degres */
-    COPYBIT_TRANSFORM_ROT_270   = HAL_TRANSFORM_ROT_270,
-};
-
-/* enable/disable value copybit_set_parameter */
-enum {
-    COPYBIT_DISABLE = 0,
-    COPYBIT_ENABLE  = 1
-};
-
-/* use get_static_info() to query static informations about the hardware */
-enum {
-    /* Maximum amount of minification supported by the hardware*/
-    COPYBIT_MINIFICATION_LIMIT  = 1,
-    /* Maximum amount of magnification supported by the hardware */
-    COPYBIT_MAGNIFICATION_LIMIT = 2,
-    /* Number of fractional bits support by the scaling engine */
-    COPYBIT_SCALING_FRAC_BITS   = 3,
-    /* Supported rotation step in degres. */
-    COPYBIT_ROTATION_STEP_DEG   = 4,
-};
-
-/* Image structure */
-struct copybit_image_t {
-    /* width */
-    uint32_t    w;
-    /* height */
-    uint32_t    h;
-    /* format COPYBIT_FORMAT_xxx */
-    int32_t     format;
-    /* base of buffer with image */
-    void        *base;
-    /* handle to the image */
-    native_handle_t* handle;
-};
-
-/* Rectangle */
-struct copybit_rect_t {
-    /* left */
-    int l;
-    /* top */
-    int t;
-    /* right */
-    int r;
-    /* bottom */
-    int b;
-};
-
-/* Color (components in range 0-255) */
-struct copybit_color_t {
-    /* Red */
-    uint8_t r;
-    /* Green */
-    uint8_t g;
-    /* Blue */
-    uint8_t b;
-    /* Alpha */
-    uint8_t a;
-};
-
-/* Region */
-struct copybit_region_t {
-    int (*next)(struct copybit_region_t const *region, struct copybit_rect_t *rect);
-};
-
-/**
- * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
- * and the fields of this data structure must begin with hw_module_t
- * followed by module specific information.
- */
-struct copybit_module_t {
-    struct hw_module_t common;
-};
-
-/**
- * Every device data structure must begin with hw_device_t
- * followed by module specific public methods and attributes.
- */
-struct copybit_device_t {
-    struct hw_device_t common;
-
-    /**
-     * Set a copybit parameter.
-     *
-     * @param dev from open
-     * @param name one for the COPYBIT_NAME_xxx
-     * @param value one of the COPYBIT_VALUE_xxx
-     *
-     * @return 0 if successful
-     */
-    int (*set_parameter)(struct copybit_device_t *dev, int name, int value);
-
-    /**
-     * Get a static copybit information.
-     *
-     * @param dev from open
-     * @param name one of the COPYBIT_STATIC_xxx
-     *
-     * @return value or -EINVAL if error
-     */
-    int (*get)(struct copybit_device_t *dev, int name);
-
-    /**
-     * Execute the bit blit copy operation
-     *
-     * @param dev from open
-     * @param dst is the destination image
-     * @param src is the source image
-     * @param region the clip region
-     *
-     * @return 0 if successful
-     */
-    int (*blit)(struct copybit_device_t *dev,
-                struct copybit_image_t const *dst,
-                struct copybit_image_t const *src,
-                struct copybit_region_t const *region);
-
-    /**
-     * Execute the stretch bit blit copy operation
-     *
-     * @param dev from open
-     * @param dst is the destination image
-     * @param src is the source image
-     * @param dst_rect is the destination rectangle
-     * @param src_rect is the source rectangle
-     * @param region the clip region
-     *
-     * @return 0 if successful
-     */
-    int (*stretch)(struct copybit_device_t *dev,
-                   struct copybit_image_t const *dst,
-                   struct copybit_image_t const *src,
-                   struct copybit_rect_t const *dst_rect,
-                   struct copybit_rect_t const *src_rect,
-                   struct copybit_region_t const *region);
-
-    /**
-     * Execute the fill bit blit operation
-     *
-     * @param dev from open
-     * @param dst is the destination image
-     * @param rect is the destination rectangle
-     * @param color is the fill color
-     * @param region the clip region
-     */
-    int (*fill)(struct copybit_device_t *dev,
-                struct copybit_image_t *dst,
-                struct copybit_rect_t *rect,
-                struct copybit_color_t *color,
-                struct copybit_region_t *region);
-};
-
-
-/** convenience API for opening and closing a device */
-
-static inline int copybit_open(const struct hw_module_t* module,
-        struct copybit_device_t** device) {
-    return module->methods->open(module,
-            COPYBIT_HARDWARE_COPYBIT0, (struct hw_device_t**)device);
-}
-
-static inline int copybit_close(struct copybit_device_t* device) {
-    return device->common.close(&device->common);
-}
-
-
-__END_DECLS
-
-#endif  // ANDROID_COPYBIT_INTERFACE_H